ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 4000 problem

 
Tyler Moyle
Occasional Advisor

Proliant 4000 problem

Hello, I have a Proliant 4000 server and I was putting a ethernet network card in and I took it out since i wanted to test and see if the computer stil l run right, when I turned it on the computer and monitor starts up but the computer seems not to load and nothing comes up on the monitor, can anyone tell me what is wrong and how i can fix this problem?
4 REPLIES 4
CA838674
Frequent Advisor

Re: Proliant 4000 problem

Did you effect such operations in Hot Plug way?
It Consultant
Tyler Moyle
Occasional Advisor

Re: Proliant 4000 problem

what do you mean by "hot plug way" ?
Highlighted
Tyler Moyle
Occasional Advisor

Re: Proliant 4000 problem

Hi, could you tell me where the Jumper with the text next to it "Clear CMOS" is?
E Evans
Advisor

Re: Proliant 4000 problem

Make sure that all covers are properly engaged and that all boards are seated firmly, remove mains power whilst doing this. Note some proliants have a pause before any display is switched on during start up give it a good 90 seconds, before trying something else.