ProLiant Servers - Netservers

Proliant DL140 Error

 
CA1332703
New Member

Proliant DL140 Error

After installing the New Proliant in the rack I attempted to load 2003 Server on it. 2003 Server when stated there where no harddrives installed. I then rebooted and checked SCSI Util and drives where present and set-up how they where supposed to be. I guess my quess would be why does 2003 Server not see the drives and how to fix this issue.
3 REPLIES 3
Tarek Kawach
Honored Contributor

Re: Proliant DL140 Error

Hi John:

you will need to hit F6; and provide the mass storage controller driver during install.
Hey, look a light at the end of the tunnel.
Oleg Koroz
Honored Contributor
CA1332703
New Member

Re: Proliant DL140 Error

I did forget to mention one aspect there is no 3 1/2 floppy drive to load the drivers from. HP Site states that the Driver CD that arrived with the server was bootable. I am finding it not to be. When I enter F6 it is looking for the 3 1/2 floppy