ProLiant Servers - Netservers

Proliant DL320 G3 win 2000 installation problems

 
Carl Hagström
New Member

Proliant DL320 G3 win 2000 installation problems

Hello

I've been trying to install win 2000 server on our DL320 server. The problem is the SATA RAID controller. Ive downloaded the driver and moved the contents to a floppy and then during the installation I press F6. After that I get an option to choose the adaptec embeded sata raid driver and everthing is fine. After formating the drive win 2000 asks for the disk again but this time it doesnt even try to read from the floppydrive and I have to quit the installation. The floppy is a USB-floppydrive connected to the front port. It is as if the installtion program loses USB support. Annyone know how to fix this? Its rather urgent.

Thanks in advance

Carl
1 REPLY 1
Enrique Pablos
New Member

Re: Proliant DL320 G3 win 2000 installation problems

Hi... Have you tried to use the smart start 7.4 ??

There comes the latest drivers for the servers.