Proliant DL320 W2K Server Setup Error

[Sven Ehrbar]

I have a DL320 with 2x80GB IDE Drives.
Smart Start 7.10 doesn't see the Controller, so i configured RAID1 with F8 (ORCA) during startup. Drives are in Online Status.

I configured Smart Start for setting up W2K Server (Select) an then it begin to copy. After reboot the installation begin. After 10 sec the following error message is coming:

The Entry "IDE CD-ROM (Atapi 1.2)/PCI IDE-Controller" in the unattended script file doesn't exist in the section of the INF file txtsetup.sif. Setup cannot continue.

What can I do? I tried also with another W2K CD. Same problem. I also tried with RAID0.

[Sven Ehrbar]

I solved the problem doing a low level format with maxtor diagnostics.

[CA1424588]

I had the same problem.

Lowlevel formating the discs didn't work, but
choosing the wright SmartStart Languarge solved the problem.

Check the languarge of your Windows installaiton media and choose the same languarge in the SmartStart setup!

yours, dominik
freecom.at