HPE Community
ProLiant Servers - Netservers
1752801 Members
5702 Online
108789 Solutions
New Discussion

Proliant DL320 With SATA drives

 
SOLVED
Go to solution
keitho
Occasional Contributor

‎07-15-2007 08:38 PM

‎07-15-2007 08:38 PM

Proliant DL320 With SATA drives

I have a proliant DL320 server with 2 146GB SATA hard drives installed. The hard drives work fine in the server ( can be seen in post, and in the disk managment in the OS ), but the LED's on the disks are not active so if a disk fails, the only way I can find out is if I remote into the server rather than the orange LED on the drive indicating a failure. I have tried one of the disks in another 320 and the LEDS work fine. Is this a back plane issue with the server?
0 Kudos
Reply
1 REPLY 1
Kedd Guyton
Respected Contributor

‎07-17-2007 12:44 AM

‎07-17-2007 12:44 AM

Solution

Re: Proliant DL320 With SATA drives

Yes, the SCSI backplane should be replaced to correct the LED issue.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.