ProLiant Servers - Netservers

Proliant DL740 Hangs with no reason and then is not responding

 
Josue Medrano
Occasional Contributor

Proliant DL740 Hangs with no reason and then is not responding

Proliant DL740 Fresh Install of win2003 SP1
Motherboard already changed.
DB SERVER.

The server got blocked for intervals of 3 or 4 hours so i need to restart the server.
I checked the event viewer 0x805000f.
No leds alarm.
System Management homepage shows NICS Link Down Before get locked out.
Please Help!
1 REPLY 1
Tarek Kawach
Honored Contributor

Re: Proliant DL740 Hangs with no reason and then is not responding

Hi Josue:

How many processors are installed on the server.

also the memory;

it looks like a processor lockup to me.
possible overwored processor or defective cache on the processor.

update the firmware and see if that resolves the issue.


Document ID: EL040709_CW01
Version: 1
SYSTEM ROM UPGRADE REQUIRED On ProLiant Servers With Intel Xeon, Xeon DP, Or Xeon MP Processors To Correct Timing Marginality In The Instruction Decoder

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EL040709_CW01
-




CUSTOMER ADVISORY
Document ID: EL041104_CW01
Version: 0
SYSTEM ROM UPGRADE REQUIRED On ProLiant Servers With Intel Xeon, Xeon DP, Or Xeon MP Processors To Correct Timing Marginality In The Arithmetic Logic Unit (ALU)

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EL041104_CW01
-

Regards,

Tarek.
Hey, look a light at the end of the tunnel.