HPE Community
ProLiant Servers - Netservers
1752287 Members
4679 Online
108786 Solutions
New Discussion юеВ

Re: Proliant ML330 can't boot to BIOS - screen photo attached

 
Taus
Occasional Contributor

тАО02-03-2006 01:54 AM

тАО02-03-2006 01:54 AM

Proliant ML330 can't boot to BIOS - screen photo attached

The screen photo shows that the boot process stalls at the SLOT PORT ID LUN count line. This has been an intermittant problem, with successful boot to Windows occurring ever 10 reboots. But now, I am frozen. Any help is appreciated. Thank you.
0 Kudos
Reply
2 REPLIES 2
Kedd Guyton
Respected Contributor

тАО02-06-2006 12:32 AM

тАО02-06-2006 12:32 AM

Re: Proliant ML330 can't boot to BIOS - screen photo attached

If you have any devices connected to the SCSI controller, you could temporarily disconnect them to keep the SCSI bus from attempting to enumerate them.
0 Kudos
Reply
Taus
Occasional Contributor

тАО02-06-2006 07:03 AM

тАО02-06-2006 07:03 AM

Re: Proliant ML330 can't boot to BIOS - screen photo attached

Problem solved. After 3.5 hours with HP - I can't say 100% that I know how it was resolved - so I wont venture a guess. I know that he boot order had somehow changed, and the drive with the OS was not in it.

Thanks for the response. It all seems to be up and running.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.