HPE Community
ProLiant Servers - Netservers
1752792 Members
6004 Online
108789 Solutions
New Discussion

Proliant ML330 - don't want raid array

 
CA1322573
New Member

‎09-07-2005 03:38 PM

‎09-07-2005 03:38 PM

Proliant ML330 - don't want raid array

I have disabled the Raid in BIOS but cannot get the machine to boot to the hard drive. I understand the secondary IDE port on the motherboard will not work for hard drives so I am still attached to the ATA port on the Raid card. Thoughts on making this behave like a PC? Thanks!
0 Kudos
Reply
1 REPLY 1
Oleg Koroz
Honored Contributor

‎09-07-2005 04:05 PM

‎09-07-2005 04:05 PM

Re: Proliant ML330 - don't want raid array

if you don't need RAID configuration, use JBOD option, each drive will be as a single drive and at same time array or logical drive, what your Server and RAID Controller model ? Raid 0 - would be same as single drive
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.