ProLiant Servers - Netservers

Proliant ML330 - don't want raid array

 
CA1322573
New Member

Proliant ML330 - don't want raid array

I have disabled the Raid in BIOS but cannot get the machine to boot to the hard drive. I understand the secondary IDE port on the motherboard will not work for hard drives so I am still attached to the ATA port on the Raid card. Thoughts on making this behave like a PC? Thanks!
1 REPLY 1
Oleg Koroz
Honored Contributor

Re: Proliant ML330 - don't want raid array

if you don't need RAID configuration, use JBOD option, each drive will be as a single drive and at same time array or logical drive, what your Server and RAID Controller model ? Raid 0 - would be same as single drive