ProLiant Servers - Netservers
1748181 Members
4197 Online
108759 Solutions
New Discussion юеВ

Re: Proliant ML370 server with SCSI drive wont setup Windows 2003 OS

 
CA1291339
New Member

Proliant ML370 server with SCSI drive wont setup Windows 2003 OS

We have a problem with the newly acquired Proliant ML370 servers. All three will accept installation of 2003 server (in the blue screen mode) and at some point indicates that it could not find the SCSI drives. The server has CD-drive but no floppy drive.
Has anyone experienced such a problem? Kindly assist.
3 REPLIES 3
CA1293429
New Member

Re: Proliant ML370 server with SCSI drive wont setup Windows 2003 OS

Yeah, have had the same problem, you need to press 'F6' (To load additional SCSI or RAID Drivers) during the blue setup screen and have the SCSI drivers on a floppy disk... then press 'S' when prompted and load the drivers from the disk.
JuanCarlos Lopez
New Member

Re: Proliant ML370 server with SCSI drive wont setup Windows 2003 OS

I have the same problem, I downloaded some drivers for the SCSI 64 bit Wide3 card, but they don't work. The server is a Proliant ML370 G2. Can you give me the link where I can download the drivers for installing Windows 2003 manually (pressing F6 and then S).
CA1358750
New Member

Re: Proliant ML370 server with SCSI drive wont setup Windows 2003 OS

Prior to attempting an OS install, you began the configuration of this box with the Smart Start CD v5.5 or above?


Smart Start ISO:
http://www.experts-exchange.com/Hardware/Q_20456209.html

If you want, the config utilities are here:
http://h18023.www1.hp.com/support/files/server/us/download/13227.html