Proliant Microserver G7 N54L problem no display

[hedi0058]

Hi,

I just bought a HP micro server.

I first started it, the server booted normally (the HP logo then server was looking for device to boot from).

I turned off the server and opened it to add RAM.

Since then (from the seconf boot) there is no display from server (even after removing the additional RAM).

When I start the server the led is blue but there is no display !

I tried to clear the cmos, but nothing changed.

Can you please tell me what should I do to solve this problem ?

Thanks

P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to ProLiant Servers - Netservers. - Hp Forum moderator

[hedi0058 · Accepted solution]

The problem was solved. It was a problem with the vga cable (not well connected). Sorry for disturbing.

[Uunona]

I am still experiencing a problem with my HP Proliant MicroServer G7 Video/display, the VGA port seems intact as it is an onboard one, I alternated monitors but in vain. It is brand new machine