ProLiant Servers - Netservers

Proliant Microserver Gen8 - cannot access SSA via F10 or F5 to setup raid controller

 
SOLVED
Go to solution
Jerrymmantteca
Visitor

Proliant Microserver Gen8 - cannot access SSA via F10 or F5 to setup raid controller

Have new Proliant Microserver Gen8 and will attempting to load Windows 2012 R2 Essentials using the on Board B120i - I initially was able to get to the SSA screen to choose maintenance or other through F10 intelligent provisioning.

So searched web found the SSA online created ISO image on DVD and booted up from it but it says the version is obsolete for B120i version running.  Cannot find anything on HP site for initializing the array or resetting the on board firmware to properly permit access.

 

1 REPLY 1
Jimmy Vance
Honored Contributor
Solution

Re: Proliant Microserver Gen8 - cannot access SSA via F10 or F5 to setup raid controller

A few possiblites and options. There is an option to disable IP (Intelligent Provisioning), IP may have gotten corrupted.

You can recover IP using the recovery image

v1.63 is the latest for Gen8, v2.x is for Gen9
http://h20566.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_c02fd94d9eba4d52a2cc30b34e

Latest version of Offline HPSSA 2.40
http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7274885&swItemId=MTX_704e02a48c974340b71eab2df1&swEnvOid=4168

 

NOTE:  You can generally click on the revision history link on the download page which should always include a link to the latest vesion

 

 

No support by private messages. Please ask the forum!