HPE Community
ProLiant Servers - Netservers
1753935 Members
10005 Online
108811 Solutions
New Discussion

Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

 
AlexD88
Occasional Collector

‎06-05-2021 08:21 PM - edited ‎06-05-2021 08:38 PM

‎06-05-2021 08:21 PM - edited ‎06-05-2021 08:38 PM

Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

I wanna to buy few server HPMG10+ with Pentium CPU and: replace up these CPUs to Xeon-2436 model(with HT tehnology). Second, need to adding QNAP QM2-2P-384 with two SSDs M.2 2280 Samsung MZ-N6E250BW. So question about possibility creation RAID1 for these SSDs via integrated s100i software RAID. Will it work? And which firmware I need for this? Third, need to install additional RAM DDR4 16GB Transcend TS2GLH72V6B 2666MHz Unbuffered ECC CL19. So need your helpfull information. thx.

0 Kudos
Reply
2 REPLIES 2
sudhirsingh
HPE Pro

‎06-14-2021 10:01 AM

‎06-14-2021 10:01 AM

Re: Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

Hi,

 

You can create raid with M.2 drives using software raid controller only (S100i SR Gen10 Software RAID)

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

Reply
AlexD88
Occasional Collector

‎06-14-2021 10:15 AM

‎06-14-2021 10:15 AM

Re: Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

I hope that m.2 shuld be work via QNAP QM2-2P-384 for RAID1, other RAID10 via Windows feature will be created.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.