ProLiant Servers - Netservers

Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

 
AlexD88
Occasional Collector

Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

I wanna to buy few server HPMG10+ with Pentium CPU and: replace up these CPUs to Xeon-2436 model(with HT tehnology). Second, need to adding QNAP QM2-2P-384 with two SSDs M.2 2280 Samsung MZ-N6E250BW. So question about possibility creation RAID1 for these SSDs via integrated s100i software RAID. Will it work? And which firmware I need for this? Third, need to install additional RAM DDR4 16GB Transcend TS2GLH72V6B 2666MHz Unbuffered ECC CL19. So need your helpfull information. thx.

2 REPLIES 2
sudhirsingh
HPE Pro

Re: Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

Hi,

 

You can create raid with M.2 drives using software raid controller only (S100i SR Gen10 Software RAID)

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

AlexD88
Occasional Collector

Re: Question about potentially Hardware replacement issue for HPE ProLiant MicroServer Gen10 Plus

I hope that m.2 shuld be work via QNAP QM2-2P-384 for RAID1, other RAID10 via Windows feature will be created.