RILOE (Original) Documentation

[Andy Simpson_3]

I have an old RILOE I that I do not know any login accounts for.

The PDF Userguide for the RILOE I is not anywhere to be found on the HP site

Assuming that it's RBSU (Rom Based Setup Utility) has been set to require login. How can I do a password reset?

Is their a DIP switch on the board for this in the same way that motherboard's with iLO's have?

Or can I use the HP Lights-Out configuration utility?

Thanks, Andy.

[Vijay_44]

If i remember correctly, the riloe has no local access passowrd. It does have a RBSU; F8 when the riloe initilizes on POST

[Andy Simpson_3]

Thanks Vijay, I haven't had a chance to put the RILOE inside a server yet, however I have read that on late firmware revisions, there is an option to not display the 'Press F8 to Configure RILOE' option during the Server's POST

If this has been set, then would a full reset of the board clear this option?

[Vijay_44]

Andy,

Not sure about that option but was able to get the user guide
This customer advisory has a link to the RILOE user guide.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES030410_CW02