ProLiant Servers - Netservers

Rebuilding a SCSI mirror

 
Andre Rahming
New Member

Rebuilding a SCSI mirror

We have an older HP proliant DL360 G3 with two 300GB SCSI Hard drives in a mirror. One has failed and I was trying to find instructions on the HP web site with a step by step guide to rebuilding it.

Thanks I just don't want to screw this up
1 REPLY 1
John Amper
Advisor

Re: Rebuilding a SCSI mirror

Andre,

Make sure you have a spare similar 300GB.

With system fully up, I mean on a log-in prompt, pull-out the bad hard drive.

Install the new similar 300GB and it will copy and rebuild by itself. This will take 20 mins. to 45 mins. depending the amount of data you have.

Good luck.
John Amper