Regarding the iLO4 flash corruption issue on Gen8...

[rmay_bk]

What is this iLO partition used for?  After upgrading the iLO to fw 2.61, hard power-cycling, and attempting to format the flash (which failed), the iLO seems to be stable now.  What am I missing (besides Intelligent Provisioning) if this doesn't get repaired?

[DANDKS]

Greetings.

Please share the information on what is the server model & what is the issue due to which an iLO4 firmware update was performed. When the iLO4 firmware update is performed, it does not format the flash. Was a NAND format performed manually?

For information about the NAND, please refer to the below link page 261

http://www.ni.com/pdf/manuals/377263a.pdf

Please update & let us know if further assistance is needed.

Thank you.

[rmay_bk]

This issue: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097

[DANDKS]

Greetings.

If the iLO is working fine, then nothing to worry.

Please let us know if you are still facing the following issue - iLO Self-Test Error 8192, Embedded Media Manager and Other Errors

Or

Do you have any other issues or any options are missing after attempting to format the NAND

If the self test error is still found on the server, we request you to log a case with HPE for a System Board replacement

Thank you

[Torsten.]

Go to ILO -> Diagnostics page and check if all is green.