ProLiant Servers - Netservers

Remote Lights Out 2 Card in ML370 G2

 
Keith W
Frequent Advisor

Remote Lights Out 2 Card in ML370 G2

I have purchased a Remote Lights Out 2 card to go in an old ML370 G2 server I need to keep for a while longer.

However, I am having some problems.

I installed the card as per the instructions, and had no problems, but as soon as I connect the internal cable to allow the Lights Out card to intercept video I lose video output from the server to the monitor.

Any ideas?

Thanks
1 REPLY 1
Kedd Guyton
Respected Contributor

Re: Remote Lights Out 2 Card in ML370 G2

The RILOE-II should only use one of the passthrough cables, internal or external, not both. Are they both connected?

I don't have an ML370 G2, but most ProLiant's have a specific PCI slot dedicated for the use of the RILOE-II. Is the RILOE-II in the HP-required slot?