ProLiant Servers - Netservers

Replaced system board now All drives failing.

 
Jason Behring
New Member

Replaced system board now All drives failing.

I just had to replace the system board in a DL380 G3. Now when I boot the orginal problem (no video) is corrected, but all my drives are showing as failing. Even if I put a new drive in.
2 REPLIES 2
Iain McCracken
Frequent Advisor

Re: Replaced system board now All drives failing.

Did you remember to swap over the raid controler it is on a little board called a ROC raid on a chip If you boot of smart start cd and run diagnistics test array controller if you havent swapped the ROC over it will say no controller detected
Jason Behring
New Member

Re: Replaced system board now All drives failing.

The only module I see that I see that I can removed is the SCSI RAM. I can get into the SCSI Array configuration, but it is telling drives that I were all good before I replaced the system board are now failed.