ProLiant Servers - Netservers

Server Booting Issue

hardev singh
Occasional Advisor

Server Booting Issue


I had update the Firmware to Latest bcz i was facing Server restart problem with DL380 G3 server so i updated the Firmware to latest know restart problem had got rectified;
but know the Server is booting late in OS .
I had Analzed all the reports but reports doesnt shows any Hardware or Software Issue with the server.

Hardev Singh
Villa David
New Member

Re: Server Booting Issue

Hi Hardev

You can try clearing the NVRAM in the system board, if you open the server you will see the System Maintenance Switch, the switch number 6 is for clean the NVRAM. You have to move the switch to ON position, then power on the server for 20 seconds, shutdown the server again and move the switch to the original position. After that, during the POST press F9 to access to the RBSU (BIOS) and set the time and date again. The System Maintenance Switch is at the right hand of the memory DIMMs