HPE Community
ProLiant Servers - Netservers
1752808 Members
5914 Online
108789 Solutions
New Discussion

Server Keyboard does not function after connecting to server via ILO or Rilo II

 
CA1219304
New Member

‎02-07-2005 05:27 AM

‎02-07-2005 05:27 AM

Server Keyboard does not function after connecting to server via ILO or Rilo II

I have 12 proliant computer with ILO and Rilo II cards in them. After I connect to the server via the ILO card, I am unable to use the mouse on the server. This behavior is occuring on all of my servers. The only way to get the mouse to respond is to reboot the server. The Rilo II cards are running firmware version 1.14 and the ILO firmware is version 1.64.

All of the server are connected to an Avocent Autoview 2000 (CAT5e KVM switch). Is this a possible problem with the avocent KVM module or a ILO issue.
0 Kudos
Reply
1 REPLY 1
CA859951
Honored Contributor

‎02-07-2005 07:27 AM

‎02-07-2005 07:27 AM

Re: Server Keyboard does not function after connecting to server via ILO or Rilo II

Paul:

This CA may help:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EM020320_CW01

http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?locale=en_US&taskId=110&prodSeriesId=397204&prodTypeId=18964&supportTaskId=3799
"Now is the only thing that's real!"
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.