ProLiant Servers - Netservers

Setting Boot Drive on ML350

 
Jonathan Moran
New Member

Setting Boot Drive on ML350

Hi,
I need some help urgently.
I have an ML350 G4 with 6 drives. I do not need RAID so I have setup 6 arrays. I just can't seem to find out how to set a drive to a bootable drive. If anyone could help please.
John
1 REPLY 1
amhakassa
Honored Contributor

Re: Setting Boot Drive on ML350

Hi Jonathan,

The Smart Array Controller must be first in controller boot order in the system BIOS setup

To do so
1. Boot the server in to F9 (RBSU-ROM Based Setup Utility)
2. Make sure the smare array controller where the hard drives connected is first in the "Controller Boot Order"
3. Reboot the server

regards
Amha Kassa