ProLiant Servers - Netservers

System Management Problem - Autorecovery

 
Christian Sauer
Occasional Contributor

System Management Problem - Autorecovery

Hello,

we just discovered an problem in ours productive server farm.
Home -> System Config -> Autorecovery -> General Information

There is an enabled / disabled autorecovery button to make sure the server is rebooting in case of an error.
The problem is now that the status switch sometime from enabled to disbaled. We couldnt reproduce the error it just happens randomly on some machines.
From installation with smartstart >= 7.80 we have this problem.

Thanks for your help.