ProLiant Servers - Netservers

Teaming Problem (CPQTEAM.SYS )

 
joe vvs
New Member

Teaming Problem (CPQTEAM.SYS )

My event log always shows the folloing messages:

Warning Event 1123
The node lost communication with cluster node 'VSP02' on network 'Public'.

Warning Event 1126
The interface for cluster node 'VSP02' on network 'Public' is unreachable by at least one other cluster node attached to the network...

Warning Event 1126
The interface for cluster node 'VSP01' on network 'Public' is unreachable by at least one other cluster node ...

Warning Event 1130
Cluster network 'Public' is down. None of the available nodes can communicate using this network...

Information Event 1122
The node (re)established communication with cluster node 'VSP02' on network 'Public'.

Warning Event 213
Replication of license information failed because the License Logging Service on server \\VSDC could not be contacted.

The Teaming configuration is set as below:
Team Type Selection : Automatic
Transmit Load Balancing Method: Automatic

Network Adapters are:
-- HP NC7170 Dual Gigabit Server Adapter Driver 8.6.11.0
-- HP NC3134 Fast Ethernet NIC Driver 8.0.21.0
-- CPQTEAM.SYS (Driver 8.20.0.0)

Can anybody tell me what happen of my system? Doesn't the driver support the heartbeat? or my setting has problem?

Thank you very much.
1 REPLY 1
Tarek Kawach
Honored Contributor

Re: Teaming Problem (CPQTEAM.SYS )

Hi Joe:

This is a tricky one:

Few things:

- Possible Failed hard drive and background parity initializing is queued. (Drive is rebuilding)

- Locked port on the switch (port security)

- Network cable or port on the nics is damaged and cable could be loose.

- Make sure that the drivers for nics and teaming is same revision;

Not sure if this is windows 2000/2003

But here are the latest drivers.

Remember before upgrading or installing the Teaming utility; make sure you dissolve the team; or even uninstall it first. â can do this from network property local area connections.

-
HP NC31xx Fast Ethernet NIC Driver for Windows Server 2003
version 8.0.21.0 B (20 Mar 06) http://h18000.www1.hp.com/support/files/server/us/download/23863.html
-
- From your notes it looks like this is the latest driver for the NC3134.
-
HP Network Configuration Utility for Windows Server 2003
version 8.40.0.0 (25 Sep 06) http://h18000.www1.hp.com/support/files/server/us/download/24243.html
-
HP NC-Series Intel Driver for Windows Server 2003
version 8.6.12.1 (20 Mar 06) http://h18000.www1.hp.com/support/files/server/us/download/23860.html
-
SUPPORT COMMUNICATION - CUSTOMER ADVISORY
Document ID: c00724877
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00724877
-

let me know how it works out for you after updates.

Best regards,

Tarek.
Hey, look a light at the end of the tunnel.