ProLiant Servers - Netservers

W2000 server sp2 on a ML110 G3 SCSI without floppy

 
CA1335610
New Member

W2000 server sp2 on a ML110 G3 SCSI without floppy

I get to set additional driver by pressing F6 on bootup from installation CD, I use an USB floppy, but when the installation starts it asks for the floppy again and then the floppy does not exist. How can i pass this, the only option is to insert a floppy or to quit by pressing F3
1 REPLY 1
Steven Clementi
Honored Contributor

Re: W2000 server sp2 on a ML110 G3 SCSI without floppy

Asgeir:

Probably the best route to take is to have the driver slipstreamed into your CD contents. There are some websites that have specific instructions on how to do this and info on the tools you will need.


I have used this site successfully to cready CD's with RAID and SATA drivers built into them...

http://unattended.msfn.org/intermediate/drivers/raid.htm


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)