Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

What memory should I use with MicroServer Gen8 G1610T

MihaiAlex86
Occasional Visitor

What memory should I use with MicroServer Gen8 G1610T

Hi All,

 

I just got my first HP Proliant MicroServer Gen8 to be used at home as a media server, file server, backup basicly to support my household needs, it came with 2GB of RAM but not enough...I've read in the Support Guide that NonECC memory's are not supported so what type of memory should I get ? ECC are kinda expensive :(

 

Thanks for reading!

 

 

P.S. this thread has been moved from ProLiant Servers (ML,DL,SL) to ProLiant Servers - Netservers. - Hp Forum moderator

1 REPLY

Re: What memory should I use with MicroServer Gen8 G1610T

I find that the quickspecs on the new MicroServers is a HUGE help. Since there are only 2 DIMM slots..page 19 shows the configs you can use and 16GB is max. UDIMMs are a bit expensive..if you want to jump to 8GB (2 x 4GB) you'd be looking at about 100 each stick. just a rough guess. Depends on what proc you're using as well. The more info you can give the better answer I can get for you! Thanks!
New here but not new to the Industry and Love to help!