Where to find Intelligent Provisioning 1.64

[PatChannel]

I cannot find Intelligent Provisioning 1.64 to use on a ProLiant MicroServer Gen8.  The only link I find is version 1.60.

Please help.

[Torsten.]

it is hard to use the new pages ... if you found a previous version, click the release history link.

[PatChannel]

I found the update.  I burned a DVD with the ISO, tried booting the server with it and it failed.

I have burned a few DVDs with the IP Update and also found 2 SPP's which I also burned.  All of the DVD's fail to run after a reboot.  The server attempts to boot from the CD .  With the SPP's, it displays the Linux file information and after 3 or 4 minutes just reboots again.  THis has become very tedious.  Is there another step I am missing to boot the ISO's?

Within Intelligent Provisioning maintenance, I try to use the firmware update, after clciking the button to update, it returns:

A runtime error occurred
TypeError:nessieinventory is undefined
flash.js:233

Any help?

[Jimmy Vance]

v1.70 is now available.  I'd suggest trying to reset the system using SW6, and then try to update IP using the latest recovery image

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7298965&swItemId=MTX_67851618d0f1444993f262f0f6&swEnvOid=4184

[PatChannel]

Jimmy, how do I reset with SW6?

[Jimmy Vance · Accepted solution]

Power down the server, unplug power cable
Locate the system maintenance switch on the system board and set SW6 to ON position
Power on the server, during POST you should see a message about maintenance switch being set to ON.
Power off the server, unplug power cable, set SW6 OFF

[PatChannel]

As I thought, the bank of switches on the mb are very small, at first glance I could'nt tell it was a bank of switches.  

After the reset I still had the NVRAM error.  I had tried  different DVD drives, all with the same behaviour.  I then tried a USB drive and it worked perfectly.

Thanks for your help!

[Jimmy Vance]

Glad you got it resolved