Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Where to find Intelligent Provisioning 1.64

SOLVED
Go to solution
PatChannel
Visitor

Where to find Intelligent Provisioning 1.64

I cannot find Intelligent Provisioning 1.64 to use on a ProLiant MicroServer Gen8.  The only link I find is version 1.60.

Please help.

7 REPLIES
Torsten.
Acclaimed Contributor

Re: Where to find Intelligent Provisioning 1.64

it is hard to use the new pages ... if you found a previous version, click the release history link.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
PatChannel
Visitor

Re: Where to find Intelligent Provisioning 1.64

I found the update.  I burned a DVD with the ISO, tried booting the server with it and it failed.

I have burned a few DVDs with the IP Update and also found 2 SPP's which I also burned.  All of the DVD's fail to run after a reboot.  The server attempts to boot from the CD .  With the SPP's, it displays the Linux file information and after 3 or 4 minutes just reboots again.  THis has become very tedious.  Is there another step I am missing to boot the ISO's?

Within Intelligent Provisioning maintenance, I try to use the firmware update, after clciking the button to update, it returns:

A runtime error occurred
TypeError:nessieinventory is undefined
flash.js:233

Any help?

Jimmy Vance
HPE Pro

Re: Where to find Intelligent Provisioning 1.64

v1.70 is now available.  I'd suggest trying to reset the system using SW6, and then try to update IP using the latest recovery image

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7298965&swItemId=MTX_67851618d0f1444993f262f0f6&swEnvOid=4184

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
PatChannel
Visitor

Re: Where to find Intelligent Provisioning 1.64

Jimmy, how do I reset with SW6?

Jimmy Vance
HPE Pro
Solution

Re: Where to find Intelligent Provisioning 1.64

Power down the server, unplug power cable
Locate the system maintenance switch on the system board and set SW6 to ON position
Power on the server, during POST you should see a message about maintenance switch being set to ON.
Power off the server, unplug power cable, set SW6 OFF

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
PatChannel
Visitor

Re: Where to find Intelligent Provisioning 1.64

As I thought, the bank of switches on the mb are very small, at first glance I could'nt tell it was a bank of switches.  

After the reset I still had the NVRAM error.  I had tried  different DVD drives, all with the same behaviour.  I then tried a USB drive and it worked perfectly.

Thanks for your help!

Jimmy Vance
HPE Pro

Re: Where to find Intelligent Provisioning 1.64

Glad you got it resolved




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!