hp pl dl580 g3

 
fabrizio giovannini
New Member

hp pl dl580 g3

hi,

After restart the system remains with black screen and blinking cursor.
No events registered, except those of the ILO integrated attached below.

Thank you
1 REPLY 1
Prem Selvam Arumugam
Trusted Contributor

Re: hp pl dl580 g3

Try pulling out all the connected devices, HDD, Scsi and do a power up; confirm you see the POST screen. Then insert back all the unplugged devices and check.

If there is no display without HDD then its the system board / BIOS

If there is no display with HDD then its the HDD or your operating system.