iLO over VPN

 
Randy McRae
Occasional Contributor

iLO over VPN

We currently have quite a few remote sites connected via T1. We have just started connecting a couple of sites with a VPN. The problem I am having is all of the sites work great using iLO except the VPN sites. When I connect via iLO, I connect a virtual media, DVD/CDRom, and it disconnects after approximately 2 minutes. This doesn't happen with all of the other sites. I can remote console in to all of the sites without a problem. Can anyone stear me in a particular direction. Note, we use all HP servers and Cisco comm hardware.
1 REPLY 1
Veram_
Frequent Advisor

Re: iLO over VPN

Hi ,

Unfortunately You haven't mentioned the Server You have and the kind of ILO.


So I am shooting in the dark, but if You have a ILO 2 board, i suggest You to update the FW of the ILO. The latest version is 1.50

Here are the fixes:
Addresses certain issues involving poor virtual media performance.
Addresses issue involving iLO 2 firmware upgrade failures on certain servers.
Corrects a problem in reconnecting via the Virtual Serial Port after the first
session is terminated.
Resolves an issue with Virtual Media installations of Linux on certain servers.
Addresses an issue where the iLO 2 web server stops responding after using the
Remote Console Acquire button.
Reduces the time required to mount a USB key larger than 4 GB.
Resolves an issue with the appearance of the Remote Console button and options
after a minimum resize of the remote console window.
Corrects a problem where iLO 2 loses its IP address under certain circumstances.
Resolves an issue in launching the Virtual Media applet from with the Blade
System Configuration Wizard.
Resolves an issue in using the CLP to change the 'oemhp_powerreg' property.
Adds Shared Network Port status to the CLP.
Fixes the 'Last Used Remote Console' status to reflect accurate status.
Resolves a problem in RIBCL where a Network port change fails to complete if
the XML file contains only one port to change.
Resolves some problems in mounting a Virtual Media image via the Virtual Media
Applet.
Corrects a problem where attempting to write to Virtual Media throws a VC++
runtime error.


Here is the Link for the Download:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=1146658&swItem=MTX-1f96d1647b804d45847ec176a1&prodNameId=1135772&swEnvOID=1005&swLang=8&taskId=135&mode=3

I hope this helps Your work

Best Regards