HPE Community
ProLiant Servers - Netservers
1752369 Members
5671 Online
108787 Solutions
New Discussion

iLO says "Please Wait Scanning" then closes

 
Cybdiver
Occasional Contributor

‎05-22-2017 06:39 AM

‎05-22-2017 06:39 AM

iLO says "Please Wait Scanning" then closes

Trying to install an OS onto a HPE ProLiant MicroServer Gen8.  I've updated the iLO to the latest version.  Had the problem with the original version.    Everything appears to be fine I'm able to put in all the info I choose the iso file from a flash drive.  It says "Please Wait Scanning" and that appears on screen for maybe a second then that vanishes and nothing happens.

Any suggestions would be helpful

Thanks all

0 Kudos
Reply
1 REPLY 1
Jimmy Vance
HPE Pro

‎05-22-2017 06:44 AM

‎05-22-2017 06:44 AM

Re: iLO says "Please Wait Scanning" then closes

@Cybdiver wrote:

Trying to install an OS onto a HPE ProLiant MicroServer Gen8.  I've updated the iLO to the latest version.  Had the problem with the original version.    Everything appears to be fine I'm able to put in all the info I choose the iso file from a flash drive.  It says "Please Wait Scanning" and that appears on screen for maybe a second then that vanishes and nothing happens.

Any suggestions would be helpful

Thanks all

Are you trying to install an OS using iLO remote console?  Not really clear on what you are attempting to do.  screenshot would be helpful

 

No support by private messages. Please ask the forum! 
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.