ProLiant Servers - Netservers

iLO (v1.14 and up) Event Log: What causes the entry "Server power removed"

 
Arnoud Dekker
Occasional Advisor

iLO (v1.14 and up) Event Log: What causes the entry "Server power removed"

Hello all,

Recently we ran into some troubles with a Proliant server and thus we checked, among other things, the iLO's Event Log.
At this point the firmware revision of the iLO was 1.14 (I believe, we've upgraded it to v1.75).
There was nothing too fancy except for 1 statement: Server power removed.
I've checked the manual for v1.80, but this exact statement isn't mentioned anywhere. It does mention things like "Server power restored" or "Server power failed"

So my question:
What can cause the appearance of "Server power removed" in the iLO's Event Log under version 1.14 or later? Can this appear when remotely powering off the server or does it mean there was some power failure?

I've attached the lines from the Event Log. I hope someone is able to supply an anwser or knows a better way to get informed about this.
3 REPLIES 3
Robert W. Wood
New Member

Re: iLO (v1.14 and up) Event Log: What causes the entry "Server power removed"

Did you ever figure this out? We are having the same problems.
Arnoud Dekker
Occasional Advisor

Re: iLO (v1.14 and up) Event Log: What causes the entry "Server power removed"

No, no answers here :(
Dams_1
Occasional Contributor

Re: iLO (v1.14 and up) Event Log: What causes the entry "Server power removed"

Hello,

We are having the same problem in a BL25 Blade server. It is as if someone just pulls out the power.
I think it is a HW problem, we are using ILO v1.82.

Tom