HPE Community
ProLiant Servers - Netservers
1753902 Members
9131 Online
108810 Solutions
New Discussion

Re: iLO5 - Create RAID disks

 
srayfay
Valued Contributor

‎11-13-2017 03:29 AM

‎11-13-2017 03:29 AM

iLO5 - Create RAID disks

Hello

Regarding my new HW : ProLiant XL170r Gen10, I need to know if there is a way to create my raid pd/ld through a ilo5 prompt (cli) ?

I found until now hponcfg but my OS is not yet installed. is there way to use something else ? ipmi, racadm ...

Regards
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎11-13-2017 04:05 AM

‎11-13-2017 04:05 AM

Re: iLO5 - Create RAID disks

I did not touch a Gen10 server yet, but I'm sure you can do this by starting Intelligent Provisioning or SSA, using GUI or CLI.

This would be more or less the same like Gen8/9 servers.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.