HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers - Netservers
Showing results for 
Search instead for 
Did you mean: 

iLO5 - Create RAID disks

Valued Contributor

iLO5 - Create RAID disks


Regarding my new HW : ProLiant XL170r Gen10, I need to know if there is a way to create my raid pd/ld through a ilo5 prompt (cli) ?

I found until now hponcfg but my OS is not yet installed. is there way to use something else ? ipmi, racadm ...

Acclaimed Contributor

Re: iLO5 - Create RAID disks

I did not touch a Gen10 server yet, but I'm sure you can do this by starting Intelligent Provisioning or SSA, using GUI or CLI.

This would be more or less the same like Gen8/9 servers.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!