ProLiant Servers - Netservers

ilo interface dl360 g3

 
Thomas Rapp
New Member

ilo interface dl360 g3

Hello,
we tried to reset the ilo interafece password.
We opened cover and change dip form switch s1 do on. Rebooted and tried to change the password without succes.
Will be happy about any advise how to do.
1 REPLY 1
Pieter 't Hart
Honored Contributor

Re: ilo interface dl360 g3

look if C:\Program Files\HP\hponcfg is present on the system
(part of proliant suport pack).

start a command prompt here.
"hponcfg.exe /reset" will reset all ILO settings to factory default.
The factory configured password was deliverd on the "tag" attached to the system and a copy is on a sticker inside the case.