ProLiant Servers - Netservers

install Windows Server 2008 64bit at Proliant DL380 G4

 
tonywong88
Advisor

install Windows Server 2008 64bit at Proliant DL380 G4

After Windows Server 2008 installation, the fans run at full speed (no stop after 1 hour).

The templature is very cool.

Very very noisy. The sound level like the moment when the server powers up in the first few seconds. The noise goes down during bios stage. When the Window logon screen come up, the noise goes up again.

Any settings in Windows Server 2008? Thanks a lot.
5 REPLIES 5
Prem Selvam Arumugam
Trusted Contributor

Re: install Windows Server 2008 64bit at Proliant DL380 G4

Just post a screenshot of your Performance monitor, also your resource details Like RAM, Processor , etc...

Even the fan speeds down after POST Still such issue may occur when there is a improper ventillation are Poor contact between Processor and Heatsink. Which may get triggered when the CPU Utilization is high.

tonywong88
Advisor

Re: install Windows Server 2008 64bit at Proliant DL380 G4

Thanks a lot Prem

the problem is just solved after upgrade of firmware.
Jon Vidarsson
New Member

Re: install Windows Server 2008 64bit at Proliant DL380 G4

Could you please specify which firmware you upgraded and to what version.
tonywong88
Advisor

Re: install Windows Server 2008 64bit at Proliant DL380 G4

just upgraded the latest bios version from HP web site
Jon Vidarsson
New Member

Re: install Windows Server 2008 64bit at Proliant DL380 G4