ProLiant Servers - Netservers

lh3000 hangs on boot up with card in pci slot

 
tom lawrence
New Member

lh3000 hangs on boot up with card in pci slot

I have a LH3000 that I want to install a gigabit ethernet card. When I put the usr997904 in slot 1 or 2 the server hangs after scanning the scsi drives. The configuration screen doesn't show.

The server will boot with the card in slot 8 but the configuration screen show slot 8 empty. I can't load the drivers when the os is loaded of course.
I have reset all the bios setting to defaults.
Any ideas.