ProLiant Servers - Netservers

ml 310 will not see new drive

 
MARK GURMAN
New Member

ml 310 will not see new drive

I have an ML310 with two 160gb sata drives arranged in a RAID 1 configuration. I want to add a new drive purely as a storage drive. When I insert the new formatted 750gb sata drive in to the Hotswap Caddy the red light on the drive goes on and then the green light flashes but then goes out.
The server does not seem to be able to recognise the drive at all.
2 REPLIES 2
lachuzhnikov
Advisor

Re: ml 310 will not see new drive

You use embedded sata-raid or external controller? You must create RAID 0 on your 750GB disk before OS can recognize it.
MARK GURMAN
New Member

Re: ml 310 will not see new drive

I am using the embedded sata raid contoller. How do you set up a RAID 0 array on a single disk?
How do you set up a RAID 0 array on the same controller as an existing RAID 1 array?