my netserver e60

[john mc]

this is my first post so be gentle :.)
i was given a E60 net server a while back and i installed windows xp onto a harddrive i put into it and everything was fine,until i received another computer and put everything back into it,last night i put the hard drive and ram back into the server and now it boots up the bios alright but will not go into windows
the screen is black with a little flasing icon in the top left corner .has anyone got any idea what is wrong
i will give more info if required
thanks in advance

[Sean T. Craig]

Hi John,

The first thing you need to do when you see this problem is clear the CMOS. On POST, when it says "Press F2 to enter setup", press the key instead. From the CMOS, go to the Exit page and choose "Clear System Configuration and exit setup." After a few seconds it will reboot. This time, choose instead and go back into the CMOS. From there, press to load defaults and then save/exit.

Try that first and let us know how it goes. If not, we'll try something else.

Good luck,

Sean T. Craig Sr. C.E.T., M.C.P.

P.S. If this information is useful, please be sure to assign points rating it's value.