1748171 Members
4168 Online
108758 Solutions
New Discussion юеВ

Re: power up

 
Dave Barwick
New Member

power up

I have a lc2000 933 that will not power up i powered down and when i came back in the morning it would not switch back on i changed the switch and then the power unit still the same I added a new 1gb ram prior and two new 18.5 drives making six intotal each 18.5gb and added a a second proccesor prior but have not yet gone through the proccess of configuring that one in to the system any help would be appreciated
4 REPLIES 4
Chris Rosan
Valued Contributor

Re: power up

You should remove the new hardware you've added. One of these devices/items may be faulty and preventing the server from powering on.

Remove all the new items, and add them one at a time until the server will no longer power on.
Dave Barwick
New Member

Re: power up

Thank you i did all what you suggested and did the job. I all so removed the battery and reintalled 2nd processor etc and other memory and it reconised the second cpu THANK YOU

How do i give you points
Chris Rosan
Valued Contributor

Re: power up

Thanks for the points offer. No-one ever gives points here.

I'm not sure. I think if you look at the response or forum thread there is an option (i don't see the option as it's your thread).

Try here:

http://forums.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1148535

You'd need to be logged in.
Vajith V
HPE Pro

Re: power up

For steps how to assign points see:
http://forums1.itrc.hp.com/service/forums/bizsupport/helptips.do?#33

Thanks,
Vajith
I am an HPE employee
Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise

Accept or Kudo