Showing results for 
Search instead for 
Did you mean: 

Re: power up

New Member

power up

I have a lc2000 933 that will not power up i powered down and when i came back in the morning it would not switch back on i changed the switch and then the power unit still the same I added a new 1gb ram prior and two new 18.5 drives making six intotal each 18.5gb and added a a second proccesor prior but have not yet gone through the proccess of configuring that one in to the system any help would be appreciated
Valued Contributor

Re: power up

You should remove the new hardware you've added. One of these devices/items may be faulty and preventing the server from powering on.

Remove all the new items, and add them one at a time until the server will no longer power on.
New Member

Re: power up

Thank you i did all what you suggested and did the job. I all so removed the battery and reintalled 2nd processor etc and other memory and it reconised the second cpu THANK YOU

How do i give you points
Valued Contributor

Re: power up

Thanks for the points offer. No-one ever gives points here.

I'm not sure. I think if you look at the response or forum thread there is an option (i don't see the option as it's your thread).

Try here:

You'd need to be logged in.
Community Manager

Re: power up

For steps how to assign points see:

I am an HPE employee
Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise

Accept or Kudo