Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

two problems with proliant G8

FelixMalaga
Occasional Advisor

two problems with proliant G8

HI i have two problems. the firmware of iLo is 2.50, the sistems rom is J06 11/02/2015

I try configure manually ip of iLO and time of server and never hold if i plug off the server.

i removed the 2032 bat and now shows 

iLO Hostname: ILO---Kv-vT---j.

 

And menu F10 dont run....

I need HElp please

 

 

7 REPLIES
Dennis Handly
Acclaimed Contributor

Re: two problems with proliant G8

What server model do you have?

FelixMalaga
Occasional Advisor

Re: two problems with proliant G8

Gen8 G1610T

Need i back up the rom? how? update?

how i do it?

Thanks! 

FelixMalaga
Occasional Advisor

Re: two problems with proliant G8

nobody know restore bios? 

Torsten.
Acclaimed Contributor

Re: two problems with proliant G8

is this the microserver gen8?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: two problems with proliant G8

Just in case this is the microserver Gen8:

BIOS:

2015.11.02 (A)(24 Okt 2016)

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7298965&swItemId=MTX_b1cc2b22faee4fe1a379fe8679&swEnvOid=4064

ILO

2.50

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=7298965&swItemId=MTX_e82c7fa33ce240f69c2390b407&swEnvOid=4064

 

For BIOS settings (RBSU) press F9 during POST, for ILO settings press F8 when you see the ILO message during POST.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FelixMalaga
Occasional Advisor

Re: two problems with proliant G8

Great, but i cant download. I registered but cant download..

 

 

Dennis Handly
Acclaimed Contributor

Re: two problems with Proliant G8

>I registered but can't download

 

What errors did you get?  No download button?