Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

windows 2008 R2 64B cluster

Idan Lerer
Occasional Contributor

windows 2008 R2 64B cluster

Hello,

I'm trying to install Windows 2008 R2 64B server on DL 380G5 with MSA 1000 (Fiber connection)
I had firemware version 4.88 (If I remember right) and for looking into some forum I need to upgrade the firmeware.
So I upgrade to 7.0 A/A
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=12169&prodSeriesId=377751&prodNameId=377753&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=co-70649-1

(What is the different between this version and 5.3 A/P version?)

I'm still getting error in my Windows 2008 cluster
Failed to put PR reserve on cluster disk 0 from node sqllab01.lab.com status 170
Cluster Disk 0 does not support Persistent Reservations. Some storage devices require specific firmware versions or settings to function properly with failover clusters. Please contact your storage administrator or storage vendor to check the configuration of the storage to allow it to function properly with failover clusters.

What I need to configure in the MSA 1000 to solve that?

How I can upgrade the MSA 1000 internal fiber switch ? (right now my firemware is V3.2.1b switch type 18.2 (from where I can download the firemware and how should I install it since in the swtich I should give only FTP IP)

Thanks
Idan