cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Hello, We have a WS460c gen9 blade. For a while it has been reporting the degraded status on the storage section. Intelligent Provisioning is not available and while we tried using a recover image for that, we kept on getting the error "error fl...
Posted to:
Original author:
I have inherited a ProLiant ml350 g6. It was being decomissioned by my company, and instead of e-waste recycling a perfectly good server, the kind admins allowed me to "e-waste" it right into the trunk of my car. I've wiped the operating sy...
Posted to:
Original author:
Hello, i'm having a problem while trying to update firmware on HP server ml350gen10. i've downloader the SPP iso (bp-Convenience-download-201809-0.iso) , made a bootable key with this it and plugged the key on the server. When the server boot on the...
Posted to:
Original author:
Hi All, I am struggling with option to boot HPE SPP over the PXE and update the firmware. I am trying to run first over UEFI. Below is my code in grub.cfg and error which I am getting and attached error from the server console. Server is able to get...
Posted to:
Original author:
Hello I have a customer which develops critical applications for aeronautic industry and because of the certifications, can not switch to centos 7 until may 2019 (estimated). During the regular process, the servers must be monitored over ipmi. On Gen...
Posted to:
Original author:
Hi, I`m trying to figure out how to easy update the software/drivers/firmware on a proliant dl380 G8. Off course I can go to hpe.com and check all the software and compare it to the drivers and software already on board. I have just one server, but n...
Posted to:
Original author:
Hi I solved the issue modifying with notepad the file c:\autounattend.xml When it appears the command prompt digit notepad c:\autounattend.xml You have to search the string <ProductKey> and below this insert a new line that contains the string...
Posted to:
Original author:
Support came back with the below commands to run on the HP VCRM server itself. It seems that HP removed some acceptable ciphers from 7.3 and that prevented the communication from earlier versions that were using communication not allowed by 7.3 C:\HP...
Posted to:
Original author:
Press F9 during POST to enter 'System Utilities' then select System Configuration - BIOS /Platform COnfiguration (RBSU) - PCI Device Enable/Disable - Embedded SATA Controller #1 : Dynamic Smart Array B140i 8 port - Press Enter, select disable
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
See posts for
dates/locations
HPE at 2018 Technology Events
Learn about the technology events where Hewlett Packard Enterprise will have a presence in 2018.
Read more
October 9 - 10, 2018
Online
Expert Days - 2018
Visit this forum and get the schedules for online HPE Expert Days where you can talk to HPE product experts, R&D and support team members and get answ...
Read more
View all
Top Authors
Acclaimed Contributor
4455
HPE Pro
5
HPE Pro
44
View all