HPE Community
HPE ProLiant
HPE ProLiant
Have questions about ProLiant servers installation, usage, maintenance, and upgrades? Find answers and share knowledge in this HPE community forum.
1753878 Members
7052 Online
108809 Solutions
New Discussion

Join the conversation with experts and colleagues

Register with HPE Community
HPE SSD RAID 5 Poor Speed
KaungPing
4 hours ago
Posted to:
Servers - General
Original author:
KaungPing
Dear all, We have configured RAID 5 using HPE 6.4TB SAS 24G Mixed Use SSD(P49057-B21/) We have 8 SSD disk and created RAID 5 with the controller MR416i, the speed in RND4K Q1T1 Read is really slow. Can someone please advise what am i doing wrong? HPE...
Umable to attach u.2 backplane to a RAID controller on DL380 Gen10
ITLearner1
yesterday
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
ITLearner1
Hi I have a DL380 Gen10 Server Earlier i bought a u.2 backplane (826689-B21) + U.2 NVME enablement kit (873732-B21) and installed 8x3.84 TB U.2 Drives and restarting the server: they are working well but i can't configure them to work as RAID (The dr...
MicroServer Gen10 Plus v2 with M2 SSD: NMI_HARDWARE_FAILURE and no solution yet
WiFriendly
yesterday
Posted to:
ProLiant Servers - Netservers
Original author:
WiFriendly
Hi HPE! I am in trouble and need support from you. It looks like I am out of ideas, as are other third-party internet board members. This is the original thread on Reddit . And this is the second thread on the STH board. Long story short, I got two o...
Flashing LED on System Board DL360 G9
Profibastler
2 weeks ago
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
Profibastler
Hello, my Server doesn`t work again. During working the server did shut down. CPU P2 was extremly hot. More than P1. After waiting approx 30Min nothing happened. Behind P2 the LED CR8 is flashing 12x short/1x long. Status LED at the front is flashing...
Gartner report
gosaye1
3 weeks ago
Posted to:
Servers - General
Original author:
gosaye1
Can anyone shar me Gartner Magic Quadrant 2023 report for HPE Proliant or HPE Modular sever
DIMM ERROR Present, Unused
Ceciliok
07-08-2022
Posted to:
Servers - General
Original author:
Ceciliok
Hello Engineers, I have a ProLiant DL360p Gen8 that is showing two memory degraded errors " Present, Unused" and in the description i had this "POST Error: 207-Memory initialization error on Processor 1 Socket 4. The operating system m...
Re: Query: Firmware update – User token USB key required?
ljkhlkbljhvgkhg
01-10-2023
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
rznr
OH MY GOD, what is this stupid piece of *****!? Can't we just update firmware without being tortured with useless stuff like that? Now the deployment of a server gets delayed because I have to wait for someone to connect the stupid USB stick to the s...
Re: HP Proliant DL380e G8 with P420 - drive Degraded (Not authenticated) after replacement
SydUmar_1
03-21-2024
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
Shalak
Hello Shalak, This is working as per design. Whenever a non-HPE drive is being used it would flag that as Not authenticated. Unfortunately, there's no way to bypass this. It may have not flagged previously (Older Non-HPE drives) maybe due to differen...
Re: G10 SPP 2021.04.0 create on usb key utility 3.0 can't boot
FezUSA
04-28-2021
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
xiaoV
I finally figured this out definitively for my environment! Using a 32GB flash drive, I "mount" the downloaded ISO file (latest SPP > 2021040) and navigate to the USB > USBKey folder and launch USBkey.exe When the utility opens, point...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Top Kudoed Authors Last 30 Days
Author
Kudos
Suman_1978 Avatar
Suman_1978
8
Robr1 Avatar
Robr1
8
shuff Avatar
shuff
7
View all
Top Solution Authors Last 30 Days
View All
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.