Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

3 active sessions reported in status summary/mouse not working

SOLVED
Go to Solution
Frequent Advisor

3 active sessions reported in status summary/mouse not working

Dear all,

We've problems with iLo in DL380 G3. When i connect to iLo (firmware 1.50), I'm unable use the mouse when I open a remote console session. Only the keyboard works on the rmeote host.

I also noticed that the active session were not closed after connecting. Three times the same usename......

How is this possible, I really need to know. I must be able to use the mouse on our remote servers.

With regards,
Cheers
Remco
3 REPLIES
Trusted Contributor

Re: 3 active sessions reported in status summary/mouse not working

If you do not "logout" the session will remain until its timeout limit has exhausted, so it is recommended that the browser not just be closed w/o logging off first. As for the mouse issue, there was a problem w/ 1.50 where the mouse would not come up in remote console. Please upgrade to 1.55 and that should clear up the problem.
Occasional Visitor

Re: 3 active sessions reported in status summary/mouse not working

Thanks for your reply.

1. The session issue: We did try to log out the sessions one time and after we logged in again, there was a another extra sessions opened. We will try it again.
2. About the firmware: I was was unaware of the newer version available.

Cheers
Remco

Trusted Contributor

Re: 3 active sessions reported in status summary/mouse not working

Here is the link to the ftp site, I don't think the web pages have been updated yet. That can take a couple of days longer.

ftp://ftp.compaq.com/pub/softpaq/sp25001-25500/SP25040.exe

ftp://ftp.compaq.com/pub/softpaq/sp25001-25500/SP25041.exe
//Add this to "OnDomLoad" event