Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Accessing the ILO network from the Host network

Occasional Contributor

Accessing the ILO network from the Host network

Hello,

I like to ask if it's possible to jump from the host network into the ilo network  ?

I'm having this concern because it is possible to configure the ILO from the host machine.

 

Thank in advance,

 

1 REPLY
HPE Pro

Re: Accessing the ILO network from the Host network

Not sure I fully understand your question. If the iLO has a dedicated iLO port, you can put iLO on a seperate management network, or the same network as the host. If you put it on the host network, then yes the host itself can be used to access iLO.  If the iLO is using the shared network port, the host cannot acces the iLO over the shared port due to the way the port sharing works.

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
//Add this to "OnDomLoad" event