Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

Bandwidth utilised by iLO

LEONG Tiang Wah
Occasional Contributor

Bandwidth utilised by iLO


Anyone know the bandwidth utilised by iLO espcially when we reboot the machine remotely? Our network engineer wanted us to stop using iLO as according to them, it chews up bandwidth.
1 REPLY
acartes
Honored Contributor

Re: Bandwidth utilised by iLO

Can you provide some details:

what server?

what version of iLO firmware?

Are you connected to iLO during the reset, and if so, to what resources?

How is the server being reset?

Can you be more specific about the network engineer's comments?

Will iLO use the network during a reset? Depends. For example, iLO might issue an SNMP trap for this event if configured. Likewise, if virtual media or remote console are in use, this will also result in network activity. If iLO is reset, the network address (DHCP) may be reacquired as well.