Blade enclosure discovery

[Riks_2]

Hi,

When I run discovery on c7000 blade enclosure, not all components are discovered...
I currently have an enclosure with 9 half height blades with 4 cisco blade switches, and 2 cisco mds switches, but only 8 blades, 1 cisco switch and 2 cisco mds switches are discovered.

I deleted all and re-run the discovery, but no luck. I accessed http:///xmldata?item=all OK, and found that cisco blade switches has the same ip address (only one) though all serial number are different...

Does anyone know why cisco network switches has the same ip address, and I can't discover one blade?

Many thanks in advance.

Regards,
Riks