Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

COMPAG DL 580 ILO error message

SOLVED
Go to solution
Stein Arvid Lid
Occasional Visitor

COMPAG DL 580 ILO error message

Greetings,

on POST on my Dl580 server , the server stops up (for quite a while) the displays the following error message:

"Compaq Integrated Lights-Out is not responding"

Any hope for my ilo card , or do i have to order service on it right away ?


3 REPLIES
HGN
Honored Contributor

Re: COMPAG DL 580 ILO error message

Hi

Did you check if the network is fine on the box, if you have already confirmed then there might be an issue with the ILO port, you can ask HP

You can refer to the url below for a different ILO issue.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES040628_CW01

Rgds

HGN
acartes
Honored Contributor
Solution

Re: COMPAG DL 580 ILO error message

Try fixing it first! Create an iLO ROM update disk and boot the server using it. This will program the latest iLO firmware which might do the trick. You might need to set the iLO security override switch to allow this flash to transpire. If you do, restore it after the flash is done.

This is probably enough. You can get the latest iLO firmware by browsing to
http://www.hp.com/servers/lights-out
then clicking iLO Standard then Software and Drivers. Pick your OS, and download the Options ROMPaq firmware diskette image.

2) reset iLO to factory defaults. If the new firmware does not do the trick, you can use iLO RBSU to clear the current configuration data. It might help to clear the event logs, too. Of course, these steps require iLO to be operational.
Stein Arvid Lid
Occasional Visitor

Re: COMPAG DL 580 ILO error message

Thank you very much, i have now updated the firmware on my ilo card , and everythin is working all right.